分类

  • 软件天地

  • 基于RedHat系统ADSL上网配置指南‖
    ADSL拨号上网的详细过程,
    示的方式从安装实例的角度为初
    希望可以给遇到此困难的朋友以
    学linux的朋友阐述了Red Hat中用
    帮助。

      首先应该确定您是否安
    adsl-setup命令启动adsl
    装了pppoe的应用程序。如果确
    配置,提示过程为英文。大概为
    实已经安装了,可以在终端用
    :

      [root@localhost root]# adsl-setup            
      Welcome to the ADSL
    client setup. First, I will
    run some checks on
      your system to make sure the PPP
    oE client is installed properly...

      The following DSL config was fou
    nd on your system:
      Device: Name:                                                    
      ppp0 DSLppp0                                                     

      Please enter the dev
    ice if you want to configure
    the present DSL config
      (default ppp0) or enter 'n' if y

    ou want to create a new one: ppp0 //默认为ppp0


      LOGIN NAME                                                          
      Enter your Login Nam
    替我的anthrax:)
    e (default SJ00411210A1): an

    thrax //这里用你自己的用户名代


      INTERFACE                                                            
      Enter the Ethernet i
    nterface connected to the AD
    SL modem
      For Solaris, this is
    likely to be something like
    /dev/hme0.
      For Linux, it will be ethX, wher
    e 'X' is a number.
      (default eth0): eth0 //默认网卡设备为eth0         

      Do you want the link to come up
    want it to come up on demand, enter
    should be dropped. If you want the l
    letters, lower-case.)
    on demand, or stay up continuously?If you
    the idle time in seconds after which the link
    ink to stay up permanently, enter 'no' (two


      NOTE: Demand-activat
    You may have some proble
    ed links do not interact wel
    ms with demand-activated lin
    l with dynamic IP addresses.
    ks.
      Enter the demand val
    拨号。
    ue (default no): no //这里使

    用默认no就可以了,断线后不自动


      DNS                                                                        
      Please enter the IP address of y
    claims that 'the server will provide
    lower-case) here. If you just press
    doing and not modify your DNS setup.
    202.96.134.133 //主DNS地址设置,根据
    our ISP's primary DNS server.If your ISP
    dynamic DNS addresses',enter 'server' (all
    enter, I will assume you know what you are
    Enter the DNS information here:
    您的具体情况替换。
      Please enter the IP
    address of your ISP's second
    ary DNS server.
      If you just press en
    ter, I will assume there is
    only one DNS server.
      Enter the secondary DNS server a

    ddress here: 202.96.134.133 //第二DNS地址设置


      PASSWORD                                                              
      Please enter your Pa
    不要认为您的键盘出了毛病
    ssword: //这里设置密码,和un
    :)
    ix规则一样,密码并不回显,因此

      Please re-enter your Password:                  
      //确认密码                                                                 

      USERCTRL                                                              
      Please enter 'yes' (two letters,
    user to start or stop DSL connection

    lower-case.) if you want to allow normal
    (default yes): yes //是否允许普通用户共享ADSL


      FIREWALLING                                                        
      Please choose the fi
    basic. You are strongly
    however, these will prov
    your machine, you must c
    the firewall rules will
    ftp, etc. If you are usi
    which allocate a privile
    rewall rules to use. Note th
    encouraged to use a more sop
    ide basic security. If you a
    hoose 'NONE' and set up fire
    deny access to all standard
    ng SSH, the rules will block
    ged source port.
    at these rules are very
    histicated firewall setup;
    re running any servers on
    walling yourself. Otherwise,
    servers like Web, e-mail,
    outgoing SSH connections

      The firewall choices are:                            
      0 - NONE: This scrip
    for ensuring the securit
    some kind of firewall ru
    t will not set any firewall
    y of your machine. You are S
    les.
    rules. You are responsible
    TRONGLY recommended to use

      1 - STANDALONE: Appropriate for
    a basic stand-alone web-surfing workstation
      2 - MASQUERADE: Appr
    LAN
    opriate for a machine acting

    as an Internet gateway for a

      Choose a type of firewall (0-2):
    1 //配置防火墙等级,根据您的需要选择。
      Start this connection at boot time          
      Do you want to start this connec
    tion at boot time?
      Please enter no or y
    则系统启动速度太慢!
    es (default no):no //是否允

    许开机自动加载,这里选择no,否


      ** Summary of what you entered **           

      Ethernet Interface: eth0                              
      User name: anthrax                                          
      Activate-on-demand: No                                  
      Primary DNS: 202.96.134.133                        
      Secondary                                                            
      DNS: 202.96.134.133                                        
      Firewalling: STANDALONE                                
      User Control: yes                                            
      Accept these setting
    s and adjust configuration f
    iles (y/n)?

      选择y,配置完成。您可以用 adsl-
    start命令启动,可以用adsl-stop命令停止。
      为了方便,可以在桌面建立一个应用
    那个快捷图标就可以建立adsl链接了,跟
    程序链接,命令就使用adsl-start。这样每次双击
    windows中一样方便。
      好了,现在就开始您的网络之旅吧。(技巧:如果依据本文内容操作扔不能链接网络,可以尝试在"系统设置->网路"中删除当前的网卡,重新配置adsl项。)


    上一页 下一页




    map